CMI SaaS Powered by Cobalt Monitoring Intelligence

Accelerate Judgment.

Your Operations. Cobalt AI’s Proven Judgment.

CMI SaaS from Cobalt AI gives your GSOC an AI judgment layer that reviews camera and access control activity against your policies and delivers verified, fully documented escalations directly to your operators.

Your team stays in command. The AI handles the noise.

Cobalt Monitoring Intelligence dashboard on a tablet, run by your own security team
Up to 95%
Reduction in unwanted
alarm noise
90–95%
Alarms auto-cleared,
reasoning documented
32 sec
Average time to operator
vs. 6–8.5 min industry
Your Stack
Works with the systems
you already run

One judgment layer across your access control and video, applying your policies to every event before it reaches your team.

Your GSOC Has Operators. It Needs Fewer Raw Alarms.

You already have operators, a GSOC and processes. What's missing is a way to keep raw alarms from landing in front of your team in the first place.

Too Many Alarms

Alarm volume grows faster than any team can review it.

Too Little Context

Raw alarms arrive without the video, badge data or policy needed to decide.

Arrival Order, Not Risk Order

Queues are worked first in, first out, so real events wait behind routine ones.

The Same Alarms, Every Day

Without root cause, propped doors and faulty readers alarm again and again.

Rules on Who Sees Video

Compliance and contracts can require monitoring to stay in-house.

Cost Grows with Every Site

Each new site adds alarms, and traditional monitoring adds headcount to match.

Connect. Apply Policy. Verify. Act.

Cobalt Monitoring Intelligence is the engine. With CMI SaaS, your own security team runs it.

1

Connect

Cobalt AI harmonizes your existing access control, cameras and video management systems into one orchestrated workflow. No rip and replace required.

2

Apply Policy

Your policies define what is allowed at which door, at which hour, for which role. Policy drives the workflow.

3

Verify

The AI compares camera and access control data with your policy and evaluates, verifies and root-causes every event.

4

Act

Verified escalations go straight to your team with the video, the access event and the policy attached. Your team decides and acts.

Your Operators See Verified Escalations, Not Raw Alarms

When an event needs a person, your operator gets the video, the access event, the policy it was checked against, and the reason it was not cleared automatically.

  • Every escalation arrives with full context attached
  • Your GSOC handles the escalations, not Cobalt's Command Center
  • Your infrastructure, data, governance and response stay under your control

Your Policy Decides What Counts as an Incident

CMI compares camera and access control data with your company policy, so the same tailgating event can be a problem at one company and routine at another.

  • Every event is judged against how your organization wants doors, badges and people to behave
  • Policy drives the workflow
  • Judgment stays with a person on your team
  • The same policy judgment at 3am Saturday as at 10am Monday, across every site and business unit
Explore the Platform
Cobalt Monitoring Intelligence — DHO Handler with AI reasoning chain showing root cause identification

Most Alarms Never Reach Your Queue

Each event ends in one of four places. Only a small share need a person. Handling the rest automatically is how up to 95% of alarms are cleared without a person.

  • Real events are escalated to a person on your team
  • Repeat behavior gets an automated message to the employee; equipment faults get a repair ticket
  • Everything else is dismissed with a forensic report that records why
  • When the AI is not sure, it does not clear the alarm. It escalates it to your team.
Cobalt Monitoring Intelligence — Monitor view showing escalated Door Forced Open event with person detection
Clear or escalate
94%
auto-cleared, while total alarms keep rising
Cobalt: root cause fixed
89%
auto-cleared, while total alarms keep falling
Three paths, not two:EscalateFixClear

Illustrative example over six months. Clearing 94% of a growing pile still leaves more to review than clearing 89% of a shrinking one.

Why 89% Is Better Than 94%

Most monitoring treats every alarm as one of two things: escalate it or clear it. Cobalt also handles the middle ground, the alarms that need a fix.

CMI SaaS uncovers the root causes of alarms and automates the fix. A door propped open out of habit triggers a message to the employee. A failing reader opens a repair ticket. Once the cause is fixed, the alarm stops coming back, so total alarm volume falls month after month.

Cobalt AI doesn't just help you find the needle. We help you clear the hay.

  • Escalate, clear or fix: the middle ground gets handled
  • Total alarm volume falls over time
  • Fewer alarms and more insight for your team

One Platform. Two Ways to Run It.

With CMI Managed, Cobalt's Command Center specialists review the AI's verdict and escalate real events, around the clock. With CMI SaaS, your own security team reviews the verified escalation and acts on it.

  • CMI SaaS fits teams with a working GSOC, rules on who can view camera feeds, or many sites
  • CMI Managed fits teams without a 24/7 GSOC, or that want Cobalt operators on every call
  • Start with one and change later, with no rip and replace
Cobalt Monitoring Intelligence — Investigator view with searchable event grid and filters

Reporting That Shows What Changed

Every event is logged with linked video, root cause analysis and a full audit trail, so your team and your leadership can see what happened, what was resolved automatically and why.

  • Searchable event grid with filters for date, site, region, alarm category and root cause
  • Repeat behavior routed to employee messages and equipment faults to repair tickets, so the same alarm stops coming back
  • A forensic report on every dismissed event that records why
Cobalt Monitoring Intelligence reporting dashboard showing key performance indicators and access control activity

Scale with Your Footprint, Not Your Headcount

Real dollars, not a percentage on a slide. CMI SaaS lowers the operating cost of running security and avoids the capital cost of replacing it. By automatically dismissing the duplicate, repetitive noise and fixing what causes it, your team spends its time only on what needs a human.

The result is efficacy: efficiency and effectiveness together. Add doors, cameras and sites without adding security payroll to match.

Do an ROI Analysis

40%
Savings on alarm response costs
62%
Reduction in manual alarm volume
32 sec vs. 6–8.5 min
Average time for a verified event to reach your operator, compared with the industry benchmark

What CMI SaaS Covers

CMI SaaS monitors forced-open doors, held-open doors and tailgating, with each detection checked against your own policy. Gun detection is offered only with CMI Managed, where Cobalt’s Command Center operators review the AI’s verdict and escalate real events.

Door Forced Open

Verify the entry. Escalate only what is real.

Door Held Open

Separate a propped door from a real breach.

Tailgating

Address the behavior, not just the alarm.

Video-Based Detection

Rolling out on the same platform. No new system to add.

Repair Tickets

Fix the fault once. Stop the repeat alarms.

Forensic Reports

Dismiss with a record. Every decision documented.

Security operators working in a customer's own GSOC in front of a video wall
Powered by Cobalt Monitoring Intelligence

How Cobalt AI Runs It in Its Own Command Center

Cobalt Monitoring Intelligence is the platform Cobalt's own Command Center runs on, around the clock, on real alarms for some of the largest enterprise customers there are. AI Handlers evaluate every event against each customer's policy, Cobalt operators verify before any action is taken, and operator corrections feed back into Handler accuracy. Every event is logged with linked video, root cause analysis and a full audit trail.

CMI SaaS is that same platform and policy engine, tested every day in real-world conditions. The difference: with CMI SaaS, your team runs it.

Cobalt Command Center operator using Cobalt Monitoring Intelligence on dual monitors

Keep the Systems You Already Run

This is incremental modernization, not rip and replace. CMI SaaS harmonizes your existing access control, video and enterprise platforms through a bi-directional API, so they work as one orchestrated workflow instead of separate systems. It deploys at the edge, in the cloud or as a hybrid, and works with what you have now, even in the middle of a migration. If your program changes, you can move between CMI SaaS and CMI Managed on the same platform without starting over.

Access Control Systems

LenelS2 OnGuard Genetec C·CURE 9000 Avigilon Avigilon Alta (Openpath) S2 NetBox BrivoOne Acre Feenics and others

Video Management & Ingest

BrivoOne Milestone XProtect Genetec RTSP/RTSPS Camera Streams and others

Identity & SSO

Okta and others

Ticketing & Workflow

ServiceNow Salesforce Slack + Salesforce Service Cloud and others

Communication

Slack Phone/SMS Email and others via API

Proven Impact Across Enterprise Deployments

Corporate Campus

Nuisance Alarm Reduction

Frequent nuisance alarms caused by tailgating events disrupted operations and overwhelmed the security team. Cobalt's root cause analysis addressed underlying issues and automated notifications for non-critical events.

75%

Reduction in manual workload

Digital Financial Services Company

Alarm Volume Transformation

High alarm volume overwhelmed security teams, leading to delayed responses and inefficiencies. Cobalt Monitoring Intelligence automated alarm dispatch and response across hundreds of alarm points.

93%

Reduction in alarm volume

High-Tech Energy Facility

Event Processing at Scale

Maintaining robust security across high-tech facilities while reducing resource inefficiencies. Cobalt Monitoring Intelligence reviewed and analyzed access control events, reducing noise and automating responses.

150,000+

Events reviewed in three months — only 39 escalated

Frequently Asked Questions

Yes. With CMI SaaS, the AI compares camera and access control data with your company policy and sends verified escalations straight to your own security team. Your GSOC handles the escalations, not Cobalt's Command Center.
They run on the same platform with the same policy engine. In both, the AI first evaluates every event against your policy. With CMI Managed, Cobalt's Command Center operators then review, escalate and act around the clock. With CMI SaaS, your own team does that part: it reviews the verified escalations, decides and acts. You can start with one and move to the other as your program changes.
No. Cobalt Monitoring Intelligence harmonizes the systems you already run, including Lenel, C-CURE, Genetec and Milestone, through bi-directional API. It can run at the edge, in the cloud or as a hybrid.
CMI SaaS needs a team on the receiving end of each escalation. If you have a complete GSOC, events go directly to it. If you do not, CMI Managed is the better fit: Cobalt's 24-hour Command Center makes the final judgment for you. The two run on the same platform, so you can move between them.
CMI SaaS covers access control monitoring: forced-open doors, held-open doors and tailgating, each checked against your own policy. Video-based coverage is rolling out on the same platform.
You do. Your policies say what is allowed at which door, at which hour, for which role. CMI compares camera and access control data with those policies. Policy drives the workflow, and judgment stays with a person on your team.
Not a raw alarm. When an event needs a person, your operator gets a verified escalation: the video, the access event, the policy it was checked against, and the reason it was not cleared automatically. Repeat behavior produces an automated message to the employee, equipment faults produce a repair ticket, and events that do not matter are dismissed with a forensic report.

Run Cobalt's Judgment Layer with Your Own Team.

CMI SaaS sends verified escalations straight to your security team. Not sure whether Managed or SaaS fits? Talk to a solutions expert.

About CMI SaaS

CMI SaaS is a way to run Cobalt Monitoring Intelligence with your own security team. The AI compares camera and access control data with your company policy and sends verified escalations straight to your team.

CMI SaaS runs on the same platform and policy engine as CMI Managed, where Cobalt's Command Center operators review and escalate events around the clock. Customers can start with one and move to the other.

Coverage

CMI SaaS covers access control monitoring: forced-open doors, held-open doors and tailgating.

How Alarms Are Resolved

Each event ends in one of four places: escalated to a person on your team, an automated message to the employee involved, a repair ticket, or dismissed with a forensic report that records why.

Harmonized Stack

Cobalt Monitoring Intelligence harmonizes leading access control and video systems including Lenel, C-CURE, Genetec and Milestone through bi-directional API.

Who Uses CMI SaaS

CMI SaaS suits security teams with a working GSOC, organizations that limit who can view camera feeds, and teams scaling across many sites.

Cobalt Monitoring Intelligence , AI-powered, Human Verified monitoring solutions for Soc and Guardforce

Request a Demo

Complete the form and we will be in touch to set up a meeting!

Demo request
Cobalt uses your contact information to communicate about our products and services. You can unsubscribe from these communications at any time. For details on how to unsubscribe and insights into our privacy practices and commitment to safeguarding your privacy, please refer to our Privacy Policy.